This is a preliminary estimate only and may vary depending on structural design, code requirements and project specifications.
Instant Results & Bill of Quantities
Total Steel Weight
0.00 طن
0 kg including lap waste
Commercial 12m Rebars
0 سيخ تجاري
Standard commercial bar length: 12 meters
Estimated Steel Cost
0 SAR
Based on entered ton price
Weight Schedule & Binding Wire Breakdown:
| Item | Weight / Quantity | Formula & Specifications |
|---|
Result type: Preliminary Estimate
Formulas & Assumptions
Formulas used
W_unit = d² / 162 (kg/m)Unit weight of a bar by diameterW_total = L_total × W_unitTotal rebar weightN_bars = ⌈ L_total / L_bar ⌉Commercial bars requiredW_estimate = V_concrete × rPreliminary estimate by reinforcement ratio (kg/m³)
Assumptions & reference values
- Industry estimatePreliminary ratios: footings 80–120, columns 120–250, slabs 80–150, beams 110–140 kg/m³.
- Default valueDefault commercial bar length 12 m (6 m and 9 m available).
- Editable assumptionLap splice / waste allowance 10%, editable.
- Industry estimateBinding wire ≈ 10 kg per tonne of rebar.
- Industry estimateConcrete spacers ≈ 80 pieces per tonne.
Notices: This result is intended for quantity estimation. Verify quantities against approved drawings and project specifications before procurement or construction.
This calculator provides quantity and preliminary cost estimation. Structural design, material specifications and final quantities must be verified against project drawings, specifications and applicable engineering standards.